Demand Charge Saver is an agile and swift solution to reduce customer demand charge.
Demand charge happens when customers request a relatively high level power supply from the grid,
which is calculated every 15min or 30min in kVA by the grid, and billed on by the highest record
throughout the billing cycle. It can sometimes make up more than half of the electricity bill.
Features of Demand Charge Saver
Energy monitoring System Integrated
Visualize through dashboardFlexible
Work with different
power source
Retrofit
Easy to install
Seamless integration
Cost Effective
General payback within
2-3 years
Energy monitoring System Integrated
Visualize through dashboardFlexible
Work with different power sourceRetrofit
Easy to install
Seamless integration
Cost Effective
General payback within
2-3 years
Our Solutions
By analyzing Customer Load Profile, we will switch off non-essential loads within seconds from the
system when the power demand from the grid is close to the demand charge threshold.
The so-called non-essential loads can be configured into multiple levels hence we can decide the
sequence of this load shaving process.
Once power demand from the grid is back to normal, we will put the shaved loads back online.
Alternatively we can also use backup energy supplies, such as generators or battery banks, to cover
peak demand instead of shutting down the non-essential load.
Solutions
Tier 1
Basic Control:
Features
• One step load shedding
• Visualized dashboard and configuration
Solutions
Tier 2
Group Control:
Features
• Multi-Group loads shedding solution based on loads’ necessity
• Balance energy saving and convenience
• Visualized dashboard and configuration
Solutions
Tier 3
Hybrid Control:
Features
• Battery charge/discharge control strategy and optimized setpoints • w/ or w/o multi-Group loads shedding based on customers’ battery capacity and use case analysis • Visualized dashboard and configurationSolutions
Features
Tier 1
Basic Control:
• One step load shedding
• Visualized dashboard and configuration
Tier 2
Group Control:
• Multi-Group loads shedding solution based on loads’ necessity
• Balance energy saving and convenience
• Visualized dashboard and configuration
Tier 3
Hybrid Control:
• Battery charge/discharge control strategy and optimized setpoints
• w/ or w/o multi-Group loads shedding based on customers’ battery capacity
and use case analysis
• Visualized dashboard and configuration